DIMPLED FOUNDATION MEMBRANE

NaN -Infinity

For 25 years, SUPERSEAL Dimpled Foundation Membrane has been protecting homes all over North America. It's a plastic dimpled sheet made from High Density Polyethylene (HDPE) plastic. It's mechanically fastened to the foundation wall and can be used on all types of foundations on the inside or on the outside. 

It's available roll heights of 3'6", 5'0, 6'0, 6'7", 7'4", 7'11" and 8'11".  All rolls are 65.5' long

All types of foundations including;

SUPERSEAL Dimpled Membrane is made from tough, long lasting plastic that keeps exterior moisture out. It prevents backfill material from touching the foundation wall or damaging the waterproof coating. Once installed it can be backfilled right away.

The dimples in the membrane create an Air Gap and Drainage Space and keeps 100% of the head water pressure off the face of the wall. This space allows moisture to condensate outward on to the membrane. By gravity, the moisture then falls to the footing drain for removal.

60% of all foundations experience cracks within the first year of being poured. Because SUPERSEAL Dimpled Membrane is mechanically fastened, the Air Gap created allows the wall to shift, crack, and settle without affecting its amazing performance.

SUPERSEAL Dimpled membrane is ICC & CCMC evaluated for U.S.A. & Canadian building codes. It's backed by a 40 year warranty.

When installed over top of SUPERSEAL Waterproofing, SUPERSEAL Dimpled membrane creates the ultimate in home waterproofing protection.

Roll Size
$131.10 CAD
$131.10 CAD
Sale Sold out
Shipping calculated at checkout.
 More payment options
View full details

TYPICAL FOUNDATION INSTALLATION

  • Measuring Tape
  • Marker / Chalk line
  • Mastic (seams & overlaps)
  • Nail Gun & Nails
  • 1¼" x 3/16" Tapcon Screws
  • Hammer
  • Screw Gun & screws for ICF's (see ICF instructions)
  • Measure from your footing to your finished grade height and lineal feet to be protected.
  • Allow 12" overlaps
  • Select the roll(s) required
  • Select your fastening system, (Premium or Basic)

The Premium System features the enhanced strength of DimpleGrip Molding. As a result, the Premium System uses less fasteners and is recommended for ICF and Block Foundations. In addition, the DimpleGrip Molding can be turned over to also be used on sloping areas.

On average, each roll of membrane will require approximately 2 bundles of DimpleGrip Molding and 2-3 bags of Super Plugs

The Basic System uses Membrane Cap Molding for all horizontal, vertical, and sloping edges. This system uses more fasteners than the Premium System.

On average, each roll of membrane will require approximately 2 bundles of Membrane Cap Molding and 3-4 bags of Super Plugs

When fastening SUPERSEAL Dimpled Foundation Membrane of Drainage Membranes to a foundation you will need the proper fasteners.

View Cart

To place an order by phone, call 1-800-571-1877

en - en

ca

null

null

PRODUCT SPECIFICATIONS & APPROVALS

SUPERSEAL Dimpled Foundation Membrane